Cryogenic pumps

离心泵

LABS VSMP NLL

活塞泵

THOR Delta N LPRP

Cryogenic piston pump

Piston pumps are designated for conversion of motor mechanical energy  into pumped fluid mechanical energy.
Pump fluid suction is caused by low pressure formation in a process chamber during a piston right motion and with closed discharge valve. Suction valve is opened by means of suction fluid head and the process chamber is completely filled.
Then, with the piston backward motion, overpressure in cylinder is much higher than in discharge pipe. Suction valve will close and discharge valve will open for supply (casing fluid discharge or displacement) in the same amount as the volume of process chamber in the pipeline discharge manifold.
Cryogenic piston pumps can be both of a single low-temperature section type and a multiple low-temperature section type.
Cryogenic piston pumps are used for buffer reservoir filling, cryogenic cylinder filling, as well as for industrial and medical bottle filling with gaseous products.  It is reasonable to use pumps of such a type also in severe application (industrial application of LNG and CO2) where high pressure is a significant factor.
You can buy the piston pump for cryogenic products placing an order on our web-site.   Wide model range of our cryogenic piston pumps makes it possible to meet requirements of all cryogenic systems.

Cryogenic submerged pump for LNG, light hydrocarbons and other non-corrosive liquids

The cryogenic submerged multistage pump assembly includes a vertically oriented pump shaft. The electric motor with permanent magnets includes a rotor attached to the pump shaft and a stator located around the rotor. The first stage impeller assembly includes a first impeller attached to the pump shaft, a first impeller configured to move cryogenic fluid from the first impeller inlet to the outlet of the first impeller when the pump shaft is rotated by an electric motor. The second stage impeller assembly includes a second impeller attached to the pump shaft, a second impeller configured to move cryogenic fluid from the first impeller body to the second impeller inlet, and then to the second output wheel when the pump shaft is rotated by an electric motor. The first and second impeller housings are located around the first and second impellers and are configured to pass cryogenic fluid.

Cryogenic centrifugal pump

Centrifugal pump is a pump where liquid moves and required head forms by means of centrifugal force raising as a result of impeller blades effect on fluid.
Thanks to impeller blades, in the process of impeller rotation fluid is pushed away from the impeller centre to its peripheral, increasing centrifugal force facilitates fluid transfer to a discharge pipe. Fluid enters the pump from suction channel as a result of pressure drop in the pump centre.
Cryogenic pumps are classified as single-staged with one impeller and multi-staged with several impellers however with the same working principle.
Cryogenic centrifugal pumps are used for large amounts of liquefied industrial gas (liquid oxygen, liquid argon, liquid nitrogen) pumping. It is also reasonable to use pumps of such a type for liquid pumping from one capacity to another.
You can buy the centrifugal pump for cryogenic products placing an order on our web-site. Wide model range of our cryogenic centrifugal pumps makes it possible to meet requirements of all cryogenic systems.